Vertex Kits|Jeep Wrangler Unlimited 2WD/4WD (2007-2018)

Who says your daily driver and your weekend warrior can't be the same vehicle? The 3.25-inch N3-Series Kit for Jeep JK was engineered by Rough Country's Research and Development Team to give the perfect blend of off-road performance and smooth highway ride. A set of application tuned, lifted coil springs are included in this kit along with a set of rear sway bar links, coil spring spacers and a rear track bar bracket! Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality.

With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.

Variant: 3.25 Inch Lift Kit|Vertex SKU: 66950-DHTP

Features:

• Easy bolt-on installation Increased ground clearance Clears up to 35" tires Factory tuned coil springs are based on the stock spring rate

Notes:

• Does NOT fit 2-door models
• If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

Variant: 3.5 Inch Lift Kit|Vertex SKU: 69430V-DHTP

Notes:

• Does NOT fit 2-door models
• 2012-2018 models require exhaust modifications to clear the front driveshaft
• (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft
• Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed
• If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft
• Rough Country does offer this driveshaft if needed

Variant: 4 Inch Lift Kit|Vertex SKU: 68150-DHTP

Notes:

• Does NOT fit 2-door models
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft
• Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed
• If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft
• Rough Country does offer this driveshaft if needed