Susp Lift Kits 4wd|Jeep Wrangler Unlimited 2WD/4WD (2007-2018)

Transform your Jeep and run larger wheels and tires with Rough Country's popular 2.5-inch Suspension lift! This easy-to-install suspension lift features everything you need to gain increased ground clearance and a killer new look.This kit features a set of lifted front and rear coil springs to offer a taller profile and fantastic off-road ability.

These coil springs are factory-tuned to the OE spring rate to offer a factory-like ride quality. This kit also features a set of Rough Country's N3 Shocks. These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality.

With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.Includes Rough Country's Lifetime Replacement Guarantee

Variant: 2.5 Inch Lift Kit|M1 Monotube|Coils SKU: 67940-DHTP

Features:

• Easy bolt-on installation Increased ground clearance Clears up to 35" tires Factory tuned coil springs are based on the stock spring rate

Notes:

• Does NOT fit 2-door models
• 35" tires will clear but rubbing may occur with extreme articulation If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

Variant: 4 Inch Lift Kit|X-Series SKU: 67430-DHTP

Notes:

• Does NOT fit 2-door models
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft
• Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed
• If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft
• Rough Country does offer this driveshaft if needed

Variant: 4 Inch Lift Kit|V2 Monotube|X-Series SKU: 67470-DHTP

Variant: 4 Inch Lift Kit|V2 Monotube SKU: 68170-DHTP

Notes:

• Does NOT fit 2-door models
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) if using stock wheels 1
• 5in wheel spacers are required
• On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft
• Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed
• If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft
• Rough Country does offer this driveshaft if needed

Variant: 4 Inch Lift Kit|M1 Monotube SKU: 68140-DHTP

Variant: 4 Inch Lift Kit|M1 Monotube|X-Series SKU: 67440-DHTP

Variant: 3.5 Inch Lift Kit SKU: 69430-DHTP

Variant: 4 Inch Lift Kit SKU: 68130-DHTP

Variant: 3.5 Inch Lift Kit|V2 Monotube SKU: 69470-DHTP

Variant: 3.25 Inch Lift Kit SKU: PERF694-DHTP

Notes:

• Does NOT fit 2-door models
• If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

Variant: 3.25 Inch Lift Kit|V2 Monotube SKU: 66970-DHTP

Variant: 3.25 Inch Lift Kit|M1 Monotube SKU: 66940-DHTP

Variant: 2.5 Inch Lift Kit|Coils SKU: 67930-DHTP

Notes:

• Does NOT fit 2-door models
• 35" tires will clear but rubbing may occur with extreme articulation If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

Variant: 2.5 Inch Lift Kit SKU: 901-DHTP

Notes:

• Does NOT fit 2-door models
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

Variant: 2.5 Inch Lift Kit|V2 Monotube|Coils SKU: 67970-DHTP

Variant: 3.5 Inch Lift Kit|M1 Monotube SKU: 69440-DHTP

Variant: 6 Inch Lift Kit|X-Series SKU: 68322-DHTP

Notes:

• Does NOT fit 2-door models
• 2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030
• Due to insufficient length it is REQUIRED to replace the factory driveshafts
• 2007-2011 replacement driveshafts available HERE
• 2012-2018 replacement driveshafts available HERE